Technology
Operating Method
Jixin windows and doors you choose should be one of the following opening patterns, please read the corresponding text description so that you could properly operate and use Jixin products.
Flat Open Pattern
1. Inward-Flat Open Pattern
Opening Operation: Please rotate the control handle 90 degree to the inside direction of window sashes and pull handle to open windows.
Close Operation: Please push the open sash to close state, rotate the control handle 90 degrees to the opposite direction of open operations and then lock the open sash.
Remark: After the window sash open, please keep controlling of the hand position to avoid wrong operations when close the sash.
2. Outward-Flat Open Pattern
Opening Operation: Please rotate the control handle 90 degree to the inside direction of window sashes, and push handle outward to open windows.
Close Operation: Please push the open sash to close state, rotate the control handle 90 degree to the opposite direction of open operations and then lock the open sash.
Remark: After the window sash open, please keep controlling of the hand position to avoid wrong operations when close the sash.
Flat and Top-Suspend Opening Pattern
Flat Opening Operation: Operation approach is same with flat opening pattern.
Top-hung operation: Please rotate the sash control handle 180 degree to the inside direction of window, and pull the handle to achieve the top-suspend open operation.
Close Operation: Please push the open sash to close state, rotate the control handle to the close position in the opposite direction of open operations and then lock the open sash.
Remark: when you make conversion from flat open to top-suspend or from top-suspend to flat open, you must firstly close and reset the opening sashes, and then rotate the control handle to the corresponding position and realize transition of the openning state.
Opposite Flat Open Pattern:
1. Open and close operation of the active sash (with control handle): same as the flat open and top-suspend open operation methods.
2.Open operation of the passive sash (with up and down control lock pin): firstly open the active sash by flat open way, and then pull out the up and down control lock pin of the passive sash to the limit position to open the passive sash.
Close operation: Please rotate the passive sash to the close position, and then roate the up and down control lock pin to the tightly close position and close the active sash.
Remark: when you close the passive sash, please do not forget to lock the control lock pin, orelse when you shut down the active sash, they will collide with each other and then the lock pin and active sash frames will be damaged.
Folding Open Pattern:
Priority Open Unit: Every Jixin folding window and door have one priority open unit which is located on the most end of folding sashes on both sides (if there is no folding sash on one side, the priority open unit could be connected to frames), its structure pattern could be flat open, flat and top-suspend open or opposite flat open.
Open and Close Operation of the Priority Open Unit: Same as the open and close way of the corresponding forms of windows and doors.
Open Operation of Folding Doors: Please open the priority open unit so that the open sashes could be all in open state, and then rotate the folding sash control handle 90 degree from the inside to outside to the inward direction, finally pull handles of every folding sashes and fold them together to achieve full open.
Close Operation of Folding Doors: Please shut off the folding sashes from the outside to inside successively and close to the frame, rotate the control handle in the opposite direction and lock folding sashes tight successively, and then at last close priority open unit to achieve close operation.
Note: In the open and close operation process of folding doors, the operation sequence is pretty critical. If you violate the regular succession and operate forcely could cause damage to hardware transmission mechanism.
Rocker-Outward Open Pattern:
Open Operation: Turn the locking device from the locking state to the open state so that the lock point in the Frame slot could exit from the lock block, and then shake the open device handle to open the window sash.
Close Operation: shake the open device handle to close the window sash, turn the lock device handle to the locking state.
Remark: In the open and close process, you should notice whether the lock point is totally exit the lock block or whether the window sash is closed tightly to avoid the damage of American hardware.
Down-Suspend Opening Pattern
Open Operation: Please rotate the control handle 90 degree to the inside direction of window sashes, and pull the handle to achieve the open operation.
Close Operation: Please push the open sash to close state, rotate the control handle 90 degree to the opposite direction of open operations and then lock the open sash.
Remark: After the window sash open, please keep controlling of the hand position to avoid wrong operations when close the sash.